Electromagnetic Feeder Coils

Coils can vary in voltage from 120v to 220v. Hole pattern, hole size, and cord length can also vary. In the event you have a burned-up coil or if you think your coil is not operating correctly, please reach out to us to get a replacement. Having a backup coil on the shelf for each drive is recommended for all feeding systems shipped out of our doors. If you are unsure of your coil model number, please click the link below to open up our coil matching sheet for part verification:

Coil Matching Sheet

Common Coil Numbers: 

BOWL COILS
  • E-0379
  • E-0399
  • E-0380
  • E-0039
  • E-0038
  • E-0516
HOPPER COILS
  • E-0185
  • E-0395
INLINE COILS
  • E-0381
  • E-0382
  • E-0383
  • E-0030

Drive Unit Leaf Springs

There are many springs that come in different shapes and sizes. Every electromagnet drive is equipped with leaf springs that vary in size and material composition. Your springs may be spring steal or fiber glass. Get in touch with our parts department to confirm your replacement. We stock thousands of springs of all shapes and sizes in the event a replacement is needed for your feeding station. The best way to match the spring you have is to return a filled-out copy of the spring matching sheet below:

SPRING MATCHING SHEET

Miscellaneous Parts & Electrical

Whether it is a complete control or a control repair kit, spare parts for your system should be utilized as a failsafe. Older systems can experience extreme wear which can essentially cause the system to work harder in order to feed parts efficiently. This is usually caused when the operator turns the bowl up at max capacity due to tuning issues and the system can get a broken spring or crack on the base drive. Customers sometimes have the ability to retune a system with our correct spare parts, but in the event they don’t have these capabilities an FCI service will have to be done. In the customers facility or ours we can have your system back up and running. Spare parts are a very critical aspect of all feeding systems.

Parts for Existing Feeding Machines

How To Find Your System Serial Number

Please provide your “FC” number to our parts department to get a full quote on all replacement parts needed. The “FC” serial number is a welded-on tag located directly on the exterior of every bowl band shipped from our facility. 

Parts Contact Phone

(317) 773-2040 Extension 102

Parts Contact Email

parts@feedingconcepts.com